Call 07942552364 90% Response Rate

our range

ASTM A335 Alloy Steel Pipe

ASTM A335 GR P11 SEAMLESS PIPE
ASTM A335 GR P22 SEAMLESS PIPE
ASTM A335 GR P5 SEAMLESS PIPE
ASTM A335 GR P9 SEAMLESS PIPE
ASTM A335 GR P91 SEAMLESS PIPE
ASTM A335 GR P12 SEAMLESS PIPE
Alloy Steel Seamless Pipe Sa335 Gr P22

Alloy Steel Seamless Pipe Sa335 Gr P22

Rs 140  / KgGet Best Price

Product Brochure

Material GradeASTM A335 GR P22
StandardASTM A335
Size1/2" - 24
Nominal Size1/2" - 24"
Outer Diameter21.3 MM OD - 610 MM
MaterialASTM A335 GR P22
Wall Thickness3 MM - 50 MM
Usage/ApplicationOil & Gas
GradeP22
Unit Pipe Length1 METER - 12 METER
ShapeRound
Surface FinishMill Finished
BrandINDIA / EUROPE / JAPAN
Country of OriginMade in India
ScheduleSCH 40 - SCHXXS
Bhavya Steel & Pipe is a known dealer of AS P22 Pipes, which is available at market leading prices. At the same time, by control of carbon and nitrogen, and careful selection of chromium, molybdenum, and tungsten levels, many of the nickel – based alloy corrosion properties, such as of Alloy Steel P22 Seamless Pipes, have been attained. The operating conditions of flue gas desulfurization systems in Alloy Steel P22 Welded Pipes offer a challenging environment for corrosion resistant materials. The hot-working temperature range for Alloy Steel P22 EFW Pipes is 1600 Degree F – 2250 Degree F (870 Degree C – 1230 Degree C). Alloy Steel P22 ERW Pipes should be water quenched after hot working, where heat treatment is recommended after hot working to ensure maximum corrosion resistance. Alloy Steel P22 Round Pipes also performs well in seawater, especially under crevice conditions where other frequently used alloys such as stainless steel. Sigma phase precipitates in Alloy Steel P22 Square Pipes can form after only a few dozen minutes between 1110 Degree F and 1830 Degree F (600 Degree C /1000 Degree C). The alpha prime precipitate phase in Alloy Steel P22 Rectangular Pipes also presents risk of embrittlement between 660 Degree F and 1020 Degree F (350 Degree C / 550 Degree C). If annealing is carried out in an oxidising atmosphere, the resulting scaling in Alloy Steel P22 Electropolishs Pipes must then be removed, e.g. by pickling.

Alloy Steel P22 Pipes Chemical Composition:
Alloy Steel P5CCrMnMoPSSi
0.05 – 0.154.00 – 6.000.30 – 0.600.45 – 0.650.025 max0.025 max0.50 – 1.00

Alloy Steel P22 Pipes Chemical Composition:
Tensile Strength, MPaYield Strength, MPaElongation
415 min205 min30 min

Outside Diameter & Tolerance:
ASTM A530 & ASTM A335NPSOutside Diameter, inchTolerance, mm
1/8≤OD≤1-1/2±0.40
1-1/2???OD≤4±0.79
4???OD≤8+1.59/-0.79
8???OD≤12+2.38/-0.79
OD>12±1%

View Complete details

get quote request a call back
P 11 Alloy Steel Seamless Pipes

P 11 Alloy Steel Seamless Pipes

Rs 130  / KgGet Best Price

Product Brochure

Material GradeASTM A335 GR P11
StandardASTM A335
Size1/2" - 24
Nominal Size1/2" - 24"
MaterialAlloy Steel
Outer Diameter21.3 MM OD - 610 MM
Wall Thickness3 MM - 50 MM
Usage/ApplicationINDUSTRIAL
GradeP11
Unit Pipe Length1 METER - 12 METER
ShapeRound
Surface FinishMill Finished
Country of OriginMade in India
ScheduleSCH 40 - SCHXXS
Bhavya Steel & Pipe is a known dealer of AS P11 Pipes, which is available at market leading prices. At the same time, by control of carbon and nitrogen, and careful selection of chromium, molybdenum, and tungsten levels, many of the nickel – based alloy corrosion properties, such as of Alloy Steel P11 Seamless Pipes, have been attained. The operating conditions of flue gas desulfurization systems in Alloy Steel P11 Welded Pipes offer a challenging environment for corrosion resistant materials. The hot-working temperature range for Alloy Steel P11 EFW Pipes is 1600 Degree F – 2250 Degree F (870 Degree C – 1230 Degree C). Alloy Steel P11 ERW Pipes should be water quenched after hot working, where heat treatment is recommended after hot working to ensure maximum corrosion resistance. Alloy Steel P11 Round Pipes also performs well in seawater, especially under crevice conditions where other frequently used alloys such as stainless steel. Sigma phase precipitates in Alloy Steel P11 Square Pipes can form after only a few dozen minutes between 1110 Degree F and 1830 Degree F (600 Degree C /1000 Degree C). The alpha prime precipitate phase in Alloy Steel P11 Rectangular Pipes also presents risk of embrittlement between 660 Degree F and 1020 Degree F (350 Degree C / 550 Degree C). If annealing is carried out in an oxidising atmosphere,

Alloy Steel P11 Seamless Pipes Specifications:
Specifications:ASTM A 335 ASME SA 335
Dimensions:ASTM, ASME and API
Size:1/8″NB TO 30″NB IN
Schedule:SCH20, SCH30, SCH40, STD, SCH80, XS, SCH60, SCH80, SCH120, SCH140, SCH160, XXS
Length:Within 13500mm
Type:Seamless / Fabricated
Form:Round, Hydraulic Etc
Length:Single Random, Double Random & Cut Length.
End:Plain End, Beveled End, Treaded

Alloy Steel P11 Pipes Chemical Composition:
Alloy Steel P5CCrMnMoPSSi
0.05 – 0.154.00 – 6.000.30 – 0.600.45 – 0.650.025 max0.025 max0.50 – 1.00

View Complete details

get quote request a call back
Alloy Steel Astm A335 P91 Pipes

Alloy Steel Astm A335 P91 Pipes

Rs 200  / KgGet Best Price

Product Brochure

Thickness3 MM - 40 M
Material GradeASTM A335 GR P91
StandardASTM A335
Nominal Size1/2" - 24"
Outer Diameter21.3 MM OD - 610 MM
MaterialAlloy Steel
Wall Thickness3 MM - 50 MM
Pipe SectionRound
Unit Pipe Length1 METER - 12 METER
Country of OriginMade in India
GradeP91
Pipe Tolerance+/-0.1 mm
Pipe SchedulesSCH 40 - SCH XXS
Bhavya Steel Pipe is Govt. recognized  ASTM A335 P91 Pipe manufacturers in India. We are offering SA335 P92 Pipe Material, Astm A335 P91 Pipe, SA335 Gr P91 pipes, ASTM A335 Gr P91 Pipe & A335 P91 Welded Pipe at Factory cost due to reasonable man hours in India and good source of high quality ASTM A335 P91 Welded Pipe at best price available in Mumbai, India. The Chemical Composition of A335 P91 Pipe includes Silicon (max.) 0.50, Manganese 0.30 - 0.60, Carbon (max.) 0.08 - 0.12, Chromium 4.00- 6.00, Phosphorus (max.) 0.025 and Molybdenum 0.45-0.65. Bhavya Steel Pipe is Vendor of P91 Seamless Pipe approved by Saudi Aramco. We maintain wide range of Astm A335 P91 Alloy Steel Pipe. We offer you vast range of GOST 550-75, A335 P91 UNS K21590 in Stock in various sizes.

If you are looking to buy SA335 P92 Pipe Material, P91 Steel Pipe at best price in India, check our price of P91 Seamless Pipe including Sa335 P91 Pipe, Steel Grade P91 pipe & SA335 P91 Material. Bhavya Steel Pipe is supplying Sa335 P91 Material to Canada, Italy, UAE, Malaysia, Kuwait, Qatar, Indonesia, Sweden, Russia, Bahrain, Turkey, Israel, USA, Oman, Germany, UK, France, Sri-Lanka, Singapore, Australia, Iran, Egypt, Thailand & Saudi Arabia.

We can supply P91 Steel Pipe at best price as we are one of the largest Stockholder & Manufacturer of A335 P91 Welded Pipe in India. We have our stocking distributors in Surat(Gujarat), Bangalore, Chennai, Hyderabad, Delhi, Pune(Maharashtra) & Tamil Nadu. Check once our SA335 P91 Pipe Material , Alloy Steel A335 P91 Pipe price and also mail for our live stock of ASME SA335 Grade P91 Pipe to check types & sizes with our ready stock we can give you best price of Tubo A335 P91. You can mail to sales for A335 Grade P91 Pipe price List. Astm A335 P91 Pipe is a ferritic-martensitic where chromium is 9 % and molybdenum is 1 % steel micro-alloyed with niobium and vanadium and has a controlled nitrogen content according to Standard Such as ASTM A 335, A 213 or to EN 10216-2 under the designation X10CrMoVNb9-1

Specification:

ASTM A335 P91 Pipe StandardASTM A335 P91, SA335 P91 (with IBR Test Certificate)
ASME SA335 P91 Pipe Size1/2" NB to 36" NB
A335 P91 Pipe Thickness3-12mm
ASTM A335 P91 Pipe SchedulesSCH 5, SCH10, SCH 40, SCH 80, SCH 80S, SCH 160, SCH XXS, SCH XS, All Schedules
ASME SA335 P91 Pipe ToleranceCold drawn pipe: +/-0.1mmCold rolled pipe: +/-0.05mm
CraftCold rolled and Cold drawn
ASTM A335 P91 Pipe TypeSeamless / ERW / Welded / Fabricated
A335 P91 Pipe available in Form ofRound, Square, Rectangular, Hydraulic Etc.
ASME SA335 P91 Pipe LengthStandard
Double &
In Cut length also.
ASTM A335 P91 Pipe EndPlain End, Beveled End, Treaded
Specialized inLarge Diameter A335 P91 Pipe
Additional TestingNACE TM0284, NACE MR 0175, NACE TM0177, HIC TEST, SSC TEST, H2 SERVICE, IBR, etc.
ApplicationSeamless Ferritic Alloy-Steel Pipe for High-Temperature Service
ASTM A335 GR P91 Pipe OriginEuropean, Japanese, Korean, US, Russian, Indian (Strictly No Chinese Material)

View Complete details

get quote request a call back
Alloy Steel Seamless Pipe A335 P5

Alloy Steel Seamless Pipe A335 P5

Rs 200  / KgGet Best Price
Material GradeASTM A335 GR P5
Size1/2" - 24
StandardASTM A335
Nominal Size1/2" - 24"
BrandBhavya Steel Pipe
Outer Diameter21.3 MM OD - 610 MM
MaterialAlloy Steel
Wall Thickness3 MM - 50 MM
Usage/ApplicationConstruction
GradeASTM A 33595
Unit Pipe Length1 METER -12 METER
ShapeRound
Surface FinishMill Finished
Country of OriginMade in India
ScheduleSCH 40 - SCHXXS

Bhavya Steel & Pipe is a known dealer of AS P5 Pipes, which is available at market leading prices. At the same time, by control of carbon and nitrogen, and careful selection of chromium, molybdenum, and tungsten levels, many of the nickel – based alloy corrosion properties, such as of Alloy Steel P5 Seamless Pipes, have been attained. The operating conditions of flue gas desulfurization systems in Alloy Steel P5 Welded Pipes offer a challenging environment for corrosion resistant materials. The hot-working temperature range for Alloy Steel P5 EFW Pipes is 1600 Degree F – 2250 Degree F (870 Degree C – 1230 Degree C). Alloy Steel P5 ERW Pipes should be water quenched after hot working, where heat treatment is recommended after hot working to ensure maximum corrosion resistance. Alloy Steel P5 Round Pipes also performs well in seawater, especially under crevice conditions where other frequently used alloys such as stainless steel. Sigma phase precipitates in Alloy Steel P5 Square Pipes can form after only a few dozen minutes between 1110 Degree F and 1830 Degree F (600 Degree C /1000 Degree C). The alpha prime precipitate phase in Alloy Steel P5 Rectangular Pipes also presents risk of embrittlement between 660 Degree F and 1020 Degree F (350 Degree C / 550 Degree C). If annealing is carried out in an oxidising atmosphere, the resulting scaling in Alloy Steel P5 Electropolishs Pipes must then be removed, e.g. by pickling.

Specifications:

Specifications:ASTM A 335 ASME SA 335
Dimensions:ASTM, ASME and API
Size:1/8″NB TO 30″NB IN
Schedule:SCH20, SCH30, SCH40, STD, SCH80, XS, SCH60, SCH80, SCH120, SCH140, SCH160, XXS
Length:Within 13500mm
Type:Seamless / Fabricated
Form:Round, Hydraulic Etc
Length:Single Random, Double Random & Cut Length.
End:Plain End, Beveled End, Treaded

View Complete details

get quote request a call back
Alloy Steel Seamless Pipe Tube

Alloy Steel Seamless Pipe Tube

Rs 350  / KgGet Best Price
Material GradeASTM A335 GR P9 Seamless Tube
Size1/2" - 24"
StandardASTM A335
Nominal Size1/2" - 24"
MaterialAlloy Steel
Outer Diameter21 MM OD X 610 MM OD
Wall Thickness3 MM - 50 MM
Usage/ApplicationConstruction
GradeASTM A335 P9
Unit Pipe Length1 METER- 6 METER
ShapeRound
Surface FinishPolished
ScheduleSCH 40 - SCH XXS
Bhavya Steel & Pipes ASTM a335 P9 Pipes. The company is highly recommended to buy quality pipes from them since they use superior quality raw material for pipes to fabricate them. Also, they use modern machinery and other latest technology in their production and keep on upgrading their products according to the latest market trend. 

Specifications:
Specifications:ASTM A 335 ASME SA 335
Dimensions:ASTM, ASME and API
Size:1/8″NB TO 30″NB IN
Schedule:SCH20, SCH30, SCH40, STD, SCH80, XS, SCH60, SCH80, SCH120, SCH140, SCH160, XXS
Length:Within 13500mm
Type:Seamless / Fabricated
Form:Round, Hydraulic Etc
Length:Single Random, Double Random & Cut Length.
End:Plain End, Beveled End, Treaded
Alloy Steel P9 Pipes Chemical Composition:
Alloy Steel P5CCrMnMoPSSi
0.05 – 0.154.00 – 6.000.30 – 0.600.45 – 0.650.025 max0.025 max0.50 – 1.00

Alloy Steel P9 Pipe Mechanical Properties:
Tensile Strength, MPaYield Strength, MPaElongation
415 min205 min30 min
Outside Diameter & Tolerance:
ASTM A530 & ASTM A335NPSOutside Diameter, inchTolerance, mm
1/8≤OD≤1-1/2±0.40
1-1/2???OD≤4±0.79
4???OD≤8+1.59/-0.79
8???OD≤12+2.38/-0.79
OD>12±1%

View Complete details

get quote request a call back

EXPLORE MORE CATEGORIES